Solvent Screen Inks

9500 Series

A general purpose screening ink for board and paper noted for good scuff resistance.

9600 Series Polyester

9600 Series is designed primarily for the printing on untreated polyester films.  The inks will dry to a film exhibiting good gloss and flexibility.

44000 Series Fast Dry Gloss Vinyl

Formulated for screen printing on a wide variety of vinyl and vinyl coated surfaces, typically used for self-adhesive stickers, signage, vehicle signage, PVC decoration.

59000 Series Enamel Plus Gloss Screen Ink

A solvent-based enamel ink formulated to screen print on a wide range of hard-to-adhere-to surfaces, such as glass, metal, wood and some plastics.

70000 Series Plasti-Vac Gloss Screen Ink

A good, general purpose printing ink. These inks have excellent adhesion to such surfaces as acrylics, cellulose acetate butyrate, styrene and rigid vinyl.

79000 Series Corogloss

A solvent based screen ink formulated for applications on fluted or corrugated rigid polypropylene (Correx). Colours are formulated for extended outdoor use on request.

Biocure Two-Pack

This is a reactive acid catalyst system. Inks are suitable for printing on treated polyethylene containers, e.g. for detergents, oils and household cleaners.

ER Series – Epoxy

This is a 2-pack catalyst system. A gloss finish, polymerization ink suitable for printing on treated polyethylene containers, phenolics, polyesters, melamine, ceramics, ferrous & non-ferrous metals and  glass. Has good resistance to solvent and chemical attack however will not withstand boiling water.

EVA Inks

This series of inks has been developed for printing directly on EVA products like cap peaks, “slops” and sporting cushions.  Once thoroughly dry (24 hours) these inks show excellent scuff resistance and water resistance

GV Series Gloss Vinyl

GV Series inks are specially formulated for printing on vinyl surfaces where a high gloss finish is required. These inks form a positive bond with most vinyl surfaces and will dry to an extremely flexible film which may be vacuum formed.

HT Series Vinyl

Formulated for screen printing on a wide variety of vinyl and vinyl coated surfaces, the ink will form a positive bond with substrates and produce a fair gloss finish which may be vacuum-formed.

IL Series Industrial Lacquer

Extremely hard finish nitro-cellulose lacquers with excellent adhesion to a wide variety of surfaces.  These inks have excellent opacity, high gloss and good mar resistance.  IL Series are, in many respects, comparable to a high quality enamel but offer the fast drying characteristics of lacquers.

MK Series Mirakal Lacquer

A universal hard finish gloss lacquer. Can be printed on lacquer coated surfaces, wood, metal, paper, cardboard displays, foil and many types of rigid plastics. Very good results are obtained as a single pot ink for polyethylene bottle printing. This system has good product resistance for soaps and bleaches, but is not suitable for alcohol/glycol based products, such as brake fluid.

MK Series Mirakal Tinplate

This series is a variation on conventional MIRAKAL ink specifically designed for printing on acrylic roller coated tinplate. THE 2 SERIES MUST NOT BE INTERMIXED. Whilst the series numbers are presently the same, in the near future a unique series number will be allocated to MIRAKAL TINPLATE INKS.

MATRIX Nylon

A solvent based screen ink formulated for applications onto nylon and polyester substrates.

Monocure

This is a blocked catalyst curing system (catalyst only reacts after the solvents evaporate) which has a shelf life of about 3 months.

NAZDAR 2-Pack Urethane Clear

2‐Part Urethane Overprint Clear has been formulated to exhibit excellent outdoor durability, good chemical resistance and flexibility. It has a high gloss and wet look finish.

PA Series Poly-ALL

PA Series Poly-ALL Screen Ink has been designed specifically for screen printing on untreated polypropylene. Its unique formulation makes pre-treatment such as flaming or surface coating unnecessary (test first).

PETVAC Series

PETVAC Series is a solvent-based ink specially formulated for printing PETG with a flexible film suitable for vacuum-forming. PETVAC Series can be formulated for extended outdoor use on request.

PP Series – Plastic Plus Gloss Vinyl

A solvent-based ink specially formulated for printing on a wide variety of vinyl and vinyl coated plastic surfaces where a high gloss finish is required.

Procat – Prolon – Polyflex

This trio of inks have been developed for printing directly onto the wide variety of nylon materials.

Proteck III Process Ink

Proteck III is an evaporation drying, 4 colour process screen ink recommended for a variety of board and paper stock.  A sharp dot is obtained producing clearly defined pictures.

Refpet Polyester

Refpet is designed for use on returnable PET bottles as well as single trip bottles.

SO Series – Scratch-Off

This ink forms very opaque film that hides the “prize” until the ink is removed by scratching with a fingernail or coin.

Toupak

The Toupak Glass Ink Series is suitable for printing onto glass, metal and polyethylene. This is a slow drying ink system. The curing time required is ca. 72 hours. The amount of catalyst added, determine the hardness of print, ie. more catalyst added will result in less flexibility and more product resistance whereas lower concentration of catalyst will result in greater flexibility and lower product resistance

TY Series – Tyvek®

These inks were specially formulated to eliminate “puckering” on Du Pont uncoated Tyvek®.  They also find application in the printing of paper and cardboard where a flat lacquer finish is desired.

WIN 3 Series

A solvent based screen ink formulated for applications on PU substrates. The inks will dry to a film exhibiting good gloss, flexibility and excellent scuff and water resistance.

Inks By Substrate